By Antibody, Inc. | How To "Get Into" The Compression Shoulder Brace

It cannot be stressed enough how important it is to follow instructions for caring for this product. Part of knowing how to care for this product is knowing how to properly get into it.

Below, the illustrative instructions will assist you in the proper way of getting into your tailor-made device. It is most effective when worn and handled properly. See About the Bodyguard™.

Although this garment is durable and made of butyl rubber, it should be handled like a fine and delicate fabric. Think of nylon, it cannot be pulled in a rough manner or it will tear. Accordingly, you will want to treat this garment like a fine, rare fabric. While not easily torn, this garment must be handled with the utmost care to preserve its form. Remember, this garment is designed especially for you and the contours of your body. If treated as such, you will receive long-lasting use of your Bodyguard. See Warranties and Guarantees.

Steps to Get Into The "Angle" Compression Shoulder Brace

STEP 1: With the front facing forward, turn the garment inside/out and slide the arm into the sleeve of the garment.

STEP 2: Just above the elbow at the base of the Bicep fold about an inch portion of the garment under so it attaches to the skin.

STEP 3: Then slide/roll the garment up the arm and onto the shoulder.

STEP 4: Place head and opposite arm through proper parts of garment.

STEP 5: Straighten out the garment and adjust it into place. Do not grip the inside of this garment or you will tear the delicate techskin surface. The Techskin surface keeps the garment anchored in place even after heavy perspiration. The proper fit is attained when the bottom of the garment is in position just below the chest.