FORGOT YOUR DETAILS?

How to “Get Into” Your Compression Garment

How To “Get Into” The Compression Shorts

load-bg_000 It cannot be stressed enough how important it is to follow instructions for caring for this product. Part of knowing how to care for this product is knowing how to properly get into it. Below, the illustrative instructions will assist you in the proper way of getting into your tailor-made device. It is most effective when worn and handled properly. Although this garment is durable and made of butyl rubber, it should be handled like a fine and delicate fabric. Think of nylon, it cannot be pulled in a rough manner or it will tear. Accordingly, you will want to treat this garment like a fine, rare fabric. While not easily torn, this garment must be handled with the utmost care to preserve its form. Remember, this garment is designed especially for you and the contours of your body. If treated as such, you will receive long-lasting use of your Bodyguard™. See Warranties and Guarantees.

 

Step 1.
load-bg_001

Turn the BodyGuard™ inside out.
Step 2.
load-bg_002

You are preparing to step into the garment from the bottom, not the top of the garment.
Step 3.
load-bg_003

Hold the lining of each leg of the garment open and step into each leg. Do not let the lining touch the skin, until it has reached the destination right above the knee. This will be the base of the garment.
Step 4.
load-bg_004

Be sure to place each leg of the garment even with the other
Step 5 a & b

load-bg_005a load-bg_005b

Fold the lining under the garment,
preparing to roll the garment up the thigh.

Step 6.
load-bg_006

Begin rolling the garment upward until it reaches the waistline.
Step 7.
load-bg_007

Gently place your hands inside the top portion of the garment.
Step 8.
load-bg_008

Gradually pull (not too hard or fast) the sides up above the waistline for a complete and comfortable fit.
Step 9.
load-bg_009

Be sure the garment is in place, with no wrinkles or sags.
Step 10.

load-bg_010a load-bg_010b

The BodyGuard™ is ready for your athletic activity.
“Feel Free to Move a Muscle.”


How To “Get Into” The Compression Shoulder Brace

It cannot be stressed enough how important it is to follow instructions for caring for this product. Part of knowing how to care for this product is knowing how to properly get into it.

shoulder_brace_suit-up_05Below, the illustrative instructions will assist you in the proper way of getting into your tailor-made device. It is most effective when worn and handled properly.

Although this garment is durable and made of butyl rubber, it should be handled like a fine and delicate fabric. Think of nylon, it cannot be pulled in a rough manner or it will tear. Accordingly, you will want to treat this garment like a fine, rare fabric. While not easily torn, this garment must be handled with the utmost care to preserve its form. Remember, this garment is designed especially for you and the contours of your body. If treated as such, you will receive long-lasting use of your Bodyguard. See Warranties and Guarantees.

shoulder_brace_suit-up_01bSTEP 1:With the front facing forward, turn the garment inside/out and slide the arm into the sleeve of the garment.
shoulder_brace_suit-up_02STEP 2:Just above the elbow at the base of the Bicep fold about an inch portion of the garment under so it attaches to the skin.
shoulder_brace_suit-up_03STEP 3:Then slide/roll the garment up the arm and onto the shoulder.
shoulder_brace_suit-up_04STEP 4:Place head and opposite arm through proper parts of garment.
shoulder_brace_suit-up_05STEP 5:Straighten out the garment and adjust it into place. Do not grip the inside of this garment or you will tear the delicate techskin surface. The Techskin surface keeps the garment anchored in place even after heavy perspiration.The proper fit is attained when the bottom of the garment is in position just below the chest.

How To “Get Into” The Compression Carpal Tunnel Wrist Brace

wrist_brace_suitup01

Step One

Turn the brace inside out so the straps are on the inside.

wrist_brace_suitup02

Step Two

Slide the brace onto the hand just above the wrist.

wrist_brace_suitup03

Step Three

Turn 1 inch of the the brace inside so the inner material attaches to the skin. Then slide the brace onto the wrist and into place. The brace should be covering the entire wrist and slightly onto the heel of the hand.

wrist_brace_suitup04

Step Four

Adjust the two compressive straps as needed.

TOP